Summary:
Lower your LiteRise® Designer Roller or Designer Screen shade only to the ordered drop and stop. Some shades include a “lower limit,” a preset stop point, but LiteRise does not; pulling past the ordered drop can expose the roller tube and adhesive tape and may detach the fabric.
Applies To:
Designer Roller Shades, Designer Screen Shades, LiteRise®
Grip the bottom rail at the center.
Lower the shade smoothly until the fabric reaches the ordered drop (the finished length specified on the order).
Stop at the ordered drop. Do not continue pulling once the fabric reaches that point.
Raise and lower once to confirm smooth travel without over-extension.
Caution: Do not lower past the ordered drop. Over-lowering can expose the roller tube and adhesive tape and may pull the fabric off the tube.
Tip: If helpful, place a small piece of removable tape on the jamb at the ordered drop as a visual stop reference.