Summary:
Set a favorite position on a PowerView® shade.
Applies To:
Legacy PowerView® (prior to Fall 2022)
Each shade can be assigned a single favorite position that is activated by pressing the ♥ button on the PowerView® Remote.
Factory default: 50% open
Custom: You can save any preferred position following the steps below
Set a Favorite Position
- Use the PowerView Remote to move all applicable shades to the desired favorite position. If you plan to change the favorite position for multiple shades, make sure to adjust each one before continuing.
- Press and hold the STOP button on the remote for approximately six seconds until the indicator lights blink.
- Release STOP on the remote.
Important: Complete steps 4-6 within 5 seconds. - Press and hold the programming button on the headrail of the shade.
- Press and release the ♥ (favorite) button on the remote. The shade will jog once to indicate the position has been set as a favorite.
- Release the programming button on the shade.
- To set the favorite position for additional shades, repeat steps 4-6 for each shade.
- Press and hold the STOP button on the remote until the indicator lights stop flashing.
For more resources, see Where can I find PowerView® manuals and spec sheets?